DK -  SE -  NO -  FI -  EN

Dosing Pumps — IX series, model C & D


IX Series - Metering pumps
A new generation of advanced metering pump technology!

  • High Turndown Ratio:
    Motor control adjusts the discharge and suction speeds to meet a full and accurate turndown ratio of 750:1
  • High Accuracy:
    Combined with precise motor control, an efficient valve design maintains accurate flow rates allowing a low cost, mechanically-driven diaphragm pump to achieve a high accuracy of ±1%.
  • Energy Savings:
    Helical gears and return springs reduce power consumption by up to 70% compared to conventional motor-driven mechanical diaphragm metering pumps.
  • High Compression Pump Head Design:
    A fixed stroke length maintains a high compression ratio in each stroke resulting in fast priming and no air-lock at any flow rate.
  • Flexible, User-friendly Interface:
    The controller position can be ordered in 6 positions for operator convenience and ease of use after installation.

Specifications (50Hz)

Model Max Capacity
Max Pressure
Average Power Consumption Current Amps Connection Size Weight
IX-C060 TC/TE 0.08 - 60 l/h 1.0 MPa 62W 0.8A 1/2" NPT 9.0
IX-C060 S6 12.0
IX-C150 TC/TE 0.2 - 150 l/h 0.4 MPa 3/4" NPT 9.0
IX-C150 S6 13.0
IX-D150 TC/TE 0,2 - 150 l/h 1.0 MPa 110W 1.3A 3/4" NPT 14.5
IX-D150 S6 15.0
IX-D300 TC/TE 0,4 - 300 l/h 0.5 MPa 1" NPT 15.5
IX-D300 S6 17.0
  • Maximum discharge capacity is rated with clean water at ambient temperature at maximum discharge pressure. Output may increase as pressure decreases.
  • Maximum viscosity :IX-C: 1000 cps IX-D: 300 cps (standard pumps - consult factory for higher viscosities)
  • Liquid temperature range: 0 -50°C (TC, TE type), 0-80°C (S6 type). No viscosity change. Non freezing. No slurry.
  • Operating temperature range: 0-50°C (Indoor use only)
  • Operating humidity range: 0-90% RH (Non-condensing in the controller)
  • Maximum dry suction lift is 6.5 ft. (2m).
  • Accuracy is not guaranteed at flows below 0.5GPH (2 LPH) for IX-D300S6, 0.26GPH (1 LPH) for IX-C150S6 or
    0.11GPH (0.4 LPH) for IX-C060S6.
  • Pumps should always be shielded from direct exposure to the elements
  • Materials: PVDF or AISI316
  • Control: mA, batch, Profibus
  • Multi Voltage: 100-240V